More brands from

Suggestions
    • Xtreme drivers for maximum energy savings

      HID-DV PROG Xt 210 CDMe/CPO C2 208-277V
      HID-DV PROG Xt 210 CDMe/CPO C2 208-277V

      HID-DV PROG Xt 210 CDMe/CPO C2 208-277V

      Order code: 22269900

      Full Product Code: 871829122269900

    Specifications Show all

    General Information
    Type version
    -
    Lamp type
    CDMe/CPO
    Number of lamps
    1 piece/unit
    Suitable for outdoor use
    Yes
    Number of products on MCB (16 A type B) (nom.)
    13
    Default lamp selected
    CDMe210
    Automatic restart
    Yes
    Operating and Electrical
    Input voltage
    208-240-277 V
    Input frequency
    50 to 60 Hz
    Minimum mains voltage operation (min.)
    172 V
    Operating frequency (nom.)
    0.20 kHz
    Power factor 100% load (nom.)
    0.99
    Ignition voltage (max.)
    5 kV
    Ignition switch-off time (max.)
    20 min
    Mains voltage performance (AC)
    188-305V
    Mains voltage safety (AC)
    160-305V
    Power factor 50% load (min.)
    0.98
    Earth leakage current (max.)
    0.7 mA
    Output peak voltage (max.)
    250 V
    Inrush current width
    4 ms
    Lamp power tolerance
    -3%/+3%
    Input current (nom.)
    1.11 A
    Inrush current peak (max.)
    4 A
    Wiring
    Cable capacity output wires mutual (nom.)
    1000 pF
    Cable length from device to lamp
    3 m
    Wire strip length
    10.0-11.0 mm
    Ballast contact wire cross section
    0.50-2.50 mm²
    Connector type
    WAGO series 804
    System characteristics
    Rated ballast-lamp power
    210 W
    Power loss on CDMe/CPO while dimming
    11 W
    Power loss on CDMe/CPO
    18 W
    Lamp power on CDMe/CPO
    210 W
    System power on CDMe/CPO
    228 W
    Rated lamp power on CDMe/CPO
    210 W
    Temperature
    T ambient (max.)
    50 °C
    T ambient (min.)
    -30 °C
    T storage (max.)
    50 °C
    T storage (min.)
    -30 °C
    T case lifetime (nom.)
    80 °C
    T-Case switch off (min.)
    92 °C
    Controls and Dimming
    Control interface
    PROG
    Programmable lamp settings
    SON250/CDO250/CDMe250
    Pre-set integrated controls
    Dali
    Programmable dimming options
    ALO/CLO/Dynadimmer/lineswitch/AmpDi
    Run-up time before dimming
    0 min
    Fade-down rate
    0.7 %/sec
    Fade-up rate
    7.9 %/sec
    Control input protection
    Yes (Basic insulation)
    Regulating level
    37%-100%
    Mechanical and Housing
    Housing
    C2
    Approval and Application
    Surge protection (common/differential)
    EN61547 (L-L 2kV, L-G 4kV), 10kV TIL kV
    IP luminaire classification
    34
    Active temperature protection
    Yes
    EMI 9 kHz... 300 MHz
    CISPR 15 ed 7.2
    EMI 30 MHz... 1,000 MHz
    -
    Safety standard
    IEC 607, 609, 926, 928  [ No Standard for HID Lamp drivers exists. Requirements in these standards to be used if considered relevant for the product.]
    Quality standard
    ISO 9000:2000
    Environmental standard
    ISO 14001
    Harmonic current emission standard
    IEC 61000-3-2
    Vibration standard
    IEC 68-2-6 Fc (10-150Hz, 2G)
    Bumps standard
    IEC 68-2-29 Eb (10G/16ms)
    Humidity standard
    EN 61347-2-12 clause 11
    Approval marks
    F-Marking
    CE marking
    ENEC certificate
    VDE-EMV certificate
    Humming and noise level
    37 dB(A)
    Product Data
    Full product code
    871829122269900
    Order product name
    HID-DV PROG Xt 210 CDMe/CPO C2 208-277V
    EAN/UPC – product
    8718291222699
    Order code
    22269900
    Local Code
    DVPROGXT210CDM
    Numerator – quantity per pack
    1
    Numerator – packs per outer box
    6
    Material no. (12NC)
    913700676966
    Net weight (piece)
    1.420 kg
    Installation Diagrams
    Downloads
    Product Data Sheets
    Visuals

    Recently Viewed

    • Add product
       
    • Add product
       
    • Add product
       
    Add product