You are now visiting the Philips lighting website. A localized version is available for you.
    • An energy-efficient solution

      HF-P 258 TL-D III 220-240V 50/60Hz IDC
      HF-P 258 TL-D III 220-240V 50/60Hz IDC

      HF-P 258 TL-D III 220-240V 50/60Hz IDC

      Order code: 91172500

      Full Product Code: 872790091172500

    Specifications Show all

    General Information
    Application code
    Type version
    Lamp type
    Number of lamps
    2 piece/unit
    Number of products on MCB (16 A type B) (nom.)
    Automatic restart
    Operating and Electrical
    Input Voltage
    220 to 240 V
    Input frequency
    50 to 60 Hz
    Operating frequency (nom.)
    45 kHz
    Ignition method
    Programmed Start
    Crest factor (max.)
    Power factor 100% load (nom.)
    Ignition time (max.)
    0.9 s
    Mains voltage performance (AC)
    Mains voltage safety (AC)
    Earth leakage current (nom.)
    0.5 mA
    Inrush current width
    0.35 ms
    Constant wattage deviation
    Ballast factor (nom.)
    Power factor (nom.)
    Power losses (nom.)
    5.5-6.1 W
    Inrush current peak (max.)
    28 A
    Connector type input terminals
    WAGO 251 universal connector  [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
    Cable capacity output wires mutual (nom.)
    200 pF
    Connector type output terminals
    WAGO 251 universal connector  [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
    Cable length hot-wiring
    0.75 m
    Wire strip length
    8.0-9.0 mm
    Dual fixture master/slave
    Not applicable  [ Master/Slave oper. not applicable]
    Input terminal cross section
    0.50-1.00 mm²
    Output terminal cross section
    0.50-1.00 mm²
    Cable capacity output wires to earth (nom.)
    200 pF
    System characteristics
    Rated ballast-lamp power
    58 W
    Rated lamp power on TL-D
    58 W
    System power on TL-D
    112.8W@58 W; 116.6W@70 W
    Lamp power on TL-D
    107.2W@58 W; 110.5W@70 W
    Power loss on TL-D
    5.5W@58 W; 6.1W@70 W
    System power on PL-L
    112.7W@55 W
    Lamp power on PL-L
    106.7W@55 W
    Power loss on PL-L
    6W@55 W
    T-ambient (max.)
    60 °C
    T-ambient (min.)
    -25 °C
    T storage (max.)
    50 °C
    T storage (min.)
    -40 °C
    T-case lifetime (nom.)
    80 °C
    T-Case maximum (max.)
    80 °C
    T-Ignition (max.)
    60 °C
    T-Ignition (min.)
    -25 °C
    Mechanical and Housing
    L 280x30x28
    Emergency Operation
    Nominal light output after 60 seconds
    100% of EBLF
    Battery voltage lamp ignition
    186-275 V
    Normal operating voltage (DC)
    220-240 V
    Battery voltage lamp operation
    Battery voltage guaranteed operation
    176-275 V
    Battery voltage guaranteed ignition
    186-275 V
    Emergency ballast lumen factor (EBLF) (nom.)
    100 %
    Nominal light output after 5 seconds
    50% of EBLF
    Approval and Application
    Energy efficiency index
    A2 BAT
    IP classification
    IP 20  [ Ingress Protection 20]
    EMI 9 kHz ... 30 MHz
    EMI 30 MHz ... 1,000 MHz
    EN55022 level B
    Safety standard
    IEC 61347-2-3
    Performance standard
    IEC 60929
    Quality standard
    ISO 9000:2000
    Environmental standard
    ISO 14001
    Harmonic current emission standard
    IEC 61000-3-2
    EMC immunity standard
    IEC 61547
    Vibration standard
    IEC68-2-6 F c
    Bumps standard
    IEC 68-2-29 Eb
    Humidity standard
    EN 61347-2-3 clause 11
    Approval marks
    CE marking
    ENEC certificate
    VDE-EMV certificate
    Temperature marking
    Emergency standard
    IEC 60598-2-22
    Humming and noise level
    < 30 dB(A)
    Product Data
    Full product code
    Order product name
    HF-P 258 TL-D III 220-240V 50/60Hz IDC
    EAN/UPC – product
    Order code
    Local order code
    SAP numerator – quantity per pack
    Numerator – packs per outer box
    SAP material
    SAP net weight (piece)
    0.231 kg
    Installation Diagrams

    Recently Viewed

    • Add product
    • Add product
    • Add product
    Add product