View all 2 products

StreetSaver - save costs, enjoy quality

StreetSaver gen2

StreetSaver gen2

  • Name

    Product family information

    In order to comply with EU regulations passed in 2015, municipalities need to replace all mercury-based lamps with lamps that are mercury-free. However, municipalities often have limited budget to handle these huge replacement operations, especially in this period of economic austerity. At the same time, municipal authorities are facing tremendous pressure to save energy and to reduce light pollution of the night sky (many mercury installations have a transparent bowl, sending light everywhere).
    StreetSaver is an affordable, high-quality solution that enables municipalities to address all these issues by changing their mercury- based luminaires to LED systems – and importantly, it requires only limited investment.


    Affordable LED post-top solution with good lighting performance
    High product quality and robust design
    Good lifespan thanks to mid-power LED and 4KV surge protection


    Dedicated LED design
    Aluminium housing and polycarbonate flat glass
    Connection directly at the bottom of the pole thanks to its 6 m cable


    Parks and plazas, pedestrian areas
    Commercial plazas, parking areas
    Residential areas
    Product family details
    • BPP008
    Light source
    • Integral LED-module
    • 27 W
    Beam angle
    • Not applicable
    Luminous flux
    • 2500 lm (4000 K)
    • 2300 lm 3000 K)
    Luminaire efficacy
    • 93 lm/W (4000 K)
    • 85 lm/W (3000 K)
    Correlated Color Temperature
    • 3000 or 4000 K
    Color Rendering Index
    • > 70, 4000 K
    • > 80, 3000 K
    Useful life - L70B50
    • 50,000 hours at 35 ºC
    Operating temperature range
    • -40 ºC < T
    • Built-in (self ballasted LED-module)
    Mains voltage
    • 220-240 V / 50-60 Hz
    Inrush current
    • 2.56 A
    • No
    • Symmetrical
    Optical element
    • Wide-street optic
    Optical cover
    • Polycarbonate bowl/ cover opal
    • Housing: high-pressure, die-cast aluminum
    • Optical cover: polycarbonate, opal
    • Canopy: ultra-dark grey, approx RAL 7043 (GR)
    • 6 m cable
    • No maintenance necessary
    • Top pole Ø 60 mm
    • Pre-wired with 6 m cable enables connexion directly at the bottom of the pole
    • Recommended mounting height: 3 - 6 m
    • Projected area: 0.115 m²
    • Luminaire is delivered 'ready-to-install', thanks to the 6 m cable that enable connexion directly at the junction box at the bottom of the pole
    • Add product
    • Add product
    • Add product
    Add product