Eye-catching display effects

ProFlood LED

Product family information

ProFlood LED is a waterproof projector allowing both image projection and creative light framing – a powerful tool that gives display lighting designers great creative freedom. They can adjust the projector's output to precisely match the surroundings or to create a particular effect, virtually 'sculpting' the light.

Benefits

Exceptionally high-quality output, including advanced control of light distribution and significantly reduced glare
Easy to install and adjust
55 W consumption delivering the lumen performance of a 150 W CDM lamp

Features

Projection of text, logos, patterns and other images by means of a gobo
Adjustable shutters enable accurate framing of monochrome or colour beams
Adjustable beam (from 20 ° to 40 °) to precisely match the surroundings and adjust the focus and uniformity
Long lifetime of 50,000 hours (L80B10 at Ta 25 °C)
Anamorphosis: dedicated software makes it possible to calculate the required gobo form to offset the distortion.

Applications

Modern and classical buildings, architectural floodlighting
See all products
Downloads
Leaflets
Visuals
Product family details
General
Type
  • BCP608
Light source
  • Integral LED-module
Power
  • 55 W (+/-5 %)
Luminous flux
  • 5,590 lm (LED flux)
Correlated Colour Temperature
  • 4,000 K
Colour Rendering Index
  • >70
Useful life
  • 50,000 hours min L80B10 at ta 25 ºC
Operating temperature range
  • -20 to 35 °C
Driver
  • Built-in (self-ballasted LED-module)
Power/Data supply
  • Xitanium LED drivers 50 W/s
Mains voltage
  • 220-240 V/50-60 Hz
Inrush current
  • 20 A
Dimming
  • No
Control system input
  • No
Options
  • Class I and Class II
  • Marine-salt protected (MSP), 500 hrs
  • Other RAL colours available
  • Module Temperature Protection (NTC)
Optic
  • ZoomSpot
  • *Four non-reflecting lenses: beam angle adjustments of 2 x 10º to 2 x 20º (Zoom spot)
  • *Image size (Ø): adjustable by moving the lens along the optical axis
  • *Image focus: adjustable by moving the two lenses along the optical axis
  • *Image uniformity: adjustable by moving the diaphragm (Ø 50 mm) along the optical axis
Optical element
  • Optical lenses set
Optical cover
  • Glass clear, with anti-reflection coating
Material
  • Housing: aluminium casting, ultra-dark grey
Colour
  • RAL10714 painting
Maintenance
  • Mains connector access by opening the rear cover by one clip (does not affect the optical settings)
  • No internal cleaning required
Installation
  • Outdoor: on mast-head frame/wall or
  • Indoor: on roof or ceiling/wall
  • *U-shaped mounting bracket with a foot-print suitable for 3-point fixation by means of M14 bolts
  • Max. adjustment from the horizontal: -180 to +180º
  • Max. vertical aiming: -90 to +90º
  • Operating temperature: -20
  • Projected area in the horizontal position: 0.12 m²
  • *Standing-up or hanging-down mounting
  • *Zoomspot system access by opening the front cannon
  • A mains M20 cable gland that accepts cable diameters from 8 mm to 12 mm
  • Mains connection: push-in connector, 3-pole
Cable gland
  • M 20
Accessories
  • GOBO support (100 mm), shutter, colour filter
Remarks
  • When the Proflood is installed to one side above or below the axis, the projected image becomes distorted without gobo correction. To overcome this, a specific "ANAMORPHOSIS software" has been designed to calculate the required gobo form to offset the distortion.
  • Special request: CRI 80 |Surge Protection 10 kV| Dimmability with external box
  • Add product
     
  • Add product
     
  • Add product
     
Add product

Cannot find what you're looking for?
Perhaps one of these links might help