More brands from

  • CoreLine Trunking – the clear choice for LED

    LL121X LED76S/830 1x PSU MB 5 WH
    LED
    LL121X LED76S/830 1x PSU MB 5 WH

    LL121X LED76S/830 1x PSU MB 5 WH

    Order code: 38132800

    Full Product Code: 871869638132800

Specifications Show all

General Information
Number of light sources
3  [ 3 pcs]
Lamp family code
LED76S  [ LED Module, system flux 7600 lm]
Beam angle of light source
120 °
Light source colour
830 warm white
Light source replaceable
No
Number of gear units
1 unit
Driver/power unit/transformer
PSU  [ Power supply unit]
Driver included
Yes
Optic type
MB  [ Medium beam]
Optical cover/lens type
No  [ -]
Luminaire light beam spread
76° x 74°
Emergency lighting
No  [ -]
Control interface
-
Internal wiring
Standard
Feed-through wiring
Feed-through wiring 5-phase
Connection
Connection unit 5-pole
Cable
-
Protection class IEC
Safety class I
Mounting
SMB  [ Ceiling-mounting bracket]
Ready-to-install
-
Glow-wire test
Temperature 650 °C, duration 5 s
Flammability mark
F  [ For mounting on normally flammable surfaces]
Accessories included
MB-SW  [ Mounting bracket for suspension wire]
CE mark
CE mark
ENEC mark
ENEC mark
Mechanical accessories
No  [ -]
Remarks
*-Per Lighting Europe guidance paper “Evaluating performance of LED based luminaires - January 2018”: statistically there is no relevant difference in lumen maintenance between B50 and for example B10. Therefore the median useful life (B50) value also represents the B10 value.
Constant light output
No
Number of products on MCB
24
RoHS mark
RoHS mark
Product Family Code
LL121X  [ CoreLine Trunking]
Light Technical
Light distribution
DIR  [ Direct lighting]
Operating and Electrical
Input voltage
220 to 240 V
Input frequency
50 to 60 Hz
Control signal voltage
0-16 V DC DALI
Circuit
No  [ -]
Circuit option
5  [ 5 conductors]
Initial CLO power consumption
- W
Average CLO power consumption
- W
Inrush current
19 A
Inrush time
0.28 ms
Power factor (min.)
0.97
Controls and Dimming
Dimmable
No
Mechanical and Housing
Housing material
Steel
Reflector material
-
Optic material
Acrylate
Optical cover/lens material
Acrylate
Fixation material
Steel
Optical cover/lens finish
Frosted
Overall length
1730 mm
Overall width
95 mm
Overall height
52 mm
Height
52 mm
Diameter
-
Approval and Application
Ingress protection code
IP20  [ Finger-protected]
Mech. impact protection code
IK02  [ 0.2 J standard]
Initial Performance (IEC Compliant)
Initial luminous flux
7600 lm
Luminous flux tolerance
+/-1%
Initial LED luminaire efficacy
141 lm/W
Init. Corr. colour temperature
3000 K
Init. colour rendering index
≥80
Initial chromaticity
(0.38, 0.38) SDCM <3
Initial input power
54 W
Power consumption tolerance
+/-10%
Over Time Performance (IEC Compliant)
Control gear failure rate at median useful life 50000 h
5 %
Lumen maintenance at median useful life* 50000 h
L80
Application Conditions
Ambient temperature range
-20 to +35 °C
Performance ambient temperature Tq
25 °C
Maximum dimming level
Not applicable
Suitable for random switching
No
Product Data
Full product code
871869638132800
Order product name
LL121X LED76S/830 1x PSU MB 5 WH
EAN/UPC – product
8718696381328
Order code
38132800
Numerator – quantity per pack
1
Numerator – packs per outer box
1
Material no. (12NC)
910925864012
Net weight (piece)
3.690 kg

Eco passport - Our environmental product specifications overview

Philips cares about the environment and society at large, and strongly supports eco-design of products.

Installation Diagrams
LL121X
LL121X
Photometrics
IFGU1_LL121X1xLED76S830MB
IFGU1_LL121X1xLED76S830MB

Recently Viewed

  • Add product
     
  • Add product
     
  • Add product
     
Add product