DynaVision Programmable Xtreme for CPO

HID-DV PROG Xt 140 CPO L1 208-277V

HID-DV PROG Xt 140 CPO L1 208-277V

  • Xtreme drivers for maximum energy savings

    Product information

    Downloads

    Leaflet
    Size:1.0 MB

    See all downloads

Videos

[trigger to render Video Gallery]

Images

Specifications Show all

General Information
Type version
-
Lamp type
CPO
Number of lamps
1 piece/unit
Suitable for outdoor use
Yes
Number of products on MCB (16 A type B) (nom.)
5
Default lamp selected
CPO140
Automatic restart
Yes
Operating and Electrical
Input voltage
208-240-277 V
Input frequency
50-60 Hz
Minimum mains voltage operation (min.)
172 V
Operating frequency (nom.)
0.40 kHz
Power factor 100% load (nom.)
0.99
Ignition voltage (max.)
5 kV
Ignition switch-off time (max.)
20 min
Mains voltage performance (AC)
188-305V
Mains voltage safety (AC)
160-305V
Power factor 50% load (min.)
0.98
Earth leakage current (max.)
0.7 mA
Output peak voltage (max.)
250 V
Inrush current width
0.47 ms
Standby power consumption (max.)
0.8 W
Lamp power tolerance
-3%/+3%
Input current (nom.)
0.75 A
Inrush current peak (max.)
52 A
Wiring
Cable capacity output wires mutual (nom.)
1000 pF
Cable length from device to lamp
10 m
Wire strip length
10.0-11.0 mm
Ballast contact wire cross section
0.50-2.50 mm²
Connector type
WAGO series 804
System characteristics
Rated ballast-lamp power
140 W
Rated lamp power on CPO
140 W
System power on CPO
153 W
Lamp power on CPO
140 W
Power loss on CPO
13 W
Power loss on CPO while dimming
7 W
Temperature
T ambient (max.)
55 °C
T ambient (min.)
-30 °C
T storage (max.)
50 °C
T storage (min.)
-30 °C
T case lifetime (nom.)
80 °C
T-Case switch off (min.)
92 °C
Controls and Dimming
Control interface
PROG
Programmable lamp settings
CPO140/SON150/CDO150
Pre-set integrated controls
Dali
Programmable dimming options
ALO/CLO/Dynadimmer/Lineswitch/AmpDi
Run-up time before dimming
5 min
Fade-down rate
0.5 %/sec
Fade-up rate
6.3 %/sec
Control input protection
Yes (Basic insulation)
Regulating level
-
Mechanical and Housing
Housing
Q
Approval and Application
Surge protection (common/differential)
EN61547 (L-L 2kV, L-G 4kV), 10kV TIL kV
IP luminaire classification
34
Active temperature protection
Yes
EMI 30 MHz... 1,000 MHz
-
Safety standard
IEC 607, 609, 926, 928  [ No Standard for HID Lamp drivers exists. Requirements in these standards to be used if considered relevant for the product.]
Quality standard
ISO 9000:2000
Environmental standard
ISO 14001
Harmonic current emission standard
IEC 61000-3-2
Vibration standard
IEC 68-2-6 Fc (10-150Hz, 2G)
Bumps standard
IEC 68-2-29 Eb (10G/16ms)
Humidity standard
EN 61347-2-12 clause 11
Approval marks
F-Marking
CE marking
VDE-EMV certificate
CB Certificate
ENEC certificate
Humming and noise level
< 30 dB(A)
Product Data
Full product code
871829124153900
Order product name
HID-DV PROG Xt 140 CPO Q 208-277V
EAN/UPC – product
8718291241539
Order code
24153900
Local Code
DVPROGXT140CPOQ
Numerator – quantity per pack
1
Numerator – packs per outer box
12
Material no. (12NC)
913700685966
Net weight (piece)
0.820 kg
Installation Diagrams
HID-DV DALI & LS Xt CPO Q
HID-DV PROG Xt CPO Q
HID-DV DALI Xt

Recently Viewed

    • Manage your projects with MyProjects
      Use MyProjects to create, save manage and share items and projects with you colleagues and team members.

Events    

 

 

Smart Buildings

19.10.2016, Birmingham NEC

Presentation: ‘Connected Lighting for Offices - Beyond Illumination’ by Darren Smith
 

Grand Designs Live

Find us on Stand L190, Technology Zone,
Hall 5

19-23.10.2016, Birmingham NEC

Highway Electrical Association (HEA)
Annual Conference
03.11.2016, Celtic Manor, Newport

WORKTECH 2016

9-10.11.2016, Canary Wharf, London
 

View all events

You are now visiting our Global professional lighting website, visit your local website by going to the USA website