You are now visiting our Global professional lighting website, visit your local website by going to the USA website
< Back to product family

HID-DV PROG Xt 250 CDO C2 208-277V

  • Xtreme drivers for maximum energy savings

    HID-DV PROG Xt 250 CDO C2 208-277V

    HID-DV PROG Xt 250 CDO C2 208-277V

    Downloads

    Leaflet
    Size:951.1 kB

    See all downloads

Specifications Show all

General Information
Type version
-
Lamp type
CDO
Number of lamps
1 piece/unit
Number of products on MCB (16 A type B) (nom.)
11
Default lamp selected
CDO250
Automatic restart
Yes
Operating and Electrical
Input voltage
208-240-277 V
Input frequency
50-60 Hz
Minimum mains voltage operation (min.)
172 V
Operating frequency (nom.)
0.20 kHz
Power factor 100% load (nom.)
0.99
Ignition voltage (max.)
5 kV
Ignition switch-off time (max.)
20 min
Mains voltage performance (AC)
188-305V
Mains voltage safety (AC)
160-305V
Power factor 50% load (min.)
0.98
Earth leakage current (max.)
0.7 mA
Output peak voltage (max.)
250 V
Inrush current width
4 ms
Standby power consumption (max.)
0.8 W
Lamp power tolerance
-3%/+3%
Input current (nom.)
1.32 A
Inrush current peak (nom.)
4 A
Wiring
Cable capacity output wires mutual (nom.)
300 pF
Cable length from device to lamp
3 m
Wire strip length
10.0-11.0 mm
Ballast contact wire cross section
0.50-2.50 mm²
Connector type
WAGO series 804
System characteristics
Rated ballast-lamp power
250 W
Rated lamp power on CDO
250 W
System power on CDO
272 W
Lamp power on CDO
250 W
Power loss on CDO
22 W
Power loss on CDO while dimming
12 W
Temperature
T ambient (max.)
50 °C
T ambient (min.)
-30 °C
T storage (max.)
50 °C
T storage (min.)
-30 °C
T case lifetime (nom.)
80 °C
T-Case switch off (min.)
92 °C
Controls and Dimming
Control interface
PROG
Programmable lamp settings
SON250/CDO250/CDMe210
Pre-set integrated controls
Dali
Programmable dimming options
ALO/CLO/Dynadim/Lineswitch/AmpDim
Run-up time before dimming
5 min
Fade-down rate
0.54 %/sec
Fade-up rate
8.33 %/sec
Regulating level
50%-100%
Mechanical and Housing
Housing
C2
Approval and Application
Surge protection (common/differential)
EN61547 (L-L 2kV, L-G 4kV), 10kV TIL kV
IP luminaire classification
34
Active temperature protection
Yes
EMI 30 MHz... 1,000 MHz
-
Safety standard
IEC 607, 609, 926, 928  [ No Standard for HID Lamp drivers exists. Requirements in these standards to be used if considered relevant for the product.]
Quality standard
ISO 9000:2000
Environmental standard
ISO 14001
Harmonic current emission standard
IEC 61000-3-2
Vibration standard
IEC 68-2-6 Fc (10-150Hz, 5G)
Bumps standard
IEC 68-2-29 Eb (10G/16ms)
Humidity standard
EN 61347-2-12 clause 11
Approval marks
F-Marking
CE marking
ENEC certificate
VDE-EMV certificate
Humming and noise level
< 30 dB(A)
Product Data
Full product code
871829122261300
Order product name
HID-DV PROG Xt 250 CDO C2 208-277V
EAN/UPC – product
8718291222613
Order code
22261300
Local Code
DVPROGXT250CDO
Numerator – quantity per pack
1
Numerator – packs per outer box
6
Material no. (12NC)
913700679666
Net weight (piece)
1.420 kg
Installation Diagrams

Recently Viewed

Downloads
Leaflets
Visuals

Events    

 

 

HEN on the Road One Day Technical Conference

11.05.2017, Surrey

 

Smart to Future Cities 

16.05.2017, London

 

Smart Buildings 

23.05.2017, London

 

View all events