More brands from

      Product family information

      Low-pressure mercury discharge lamp with a tubular 26 mm envelope and a clear protective coating


      Protective Teflon coating keeps glass and lamp components together in case of accidental breakage; allows use in open luminaires in food & beverages industry
      Easy identification in audit situations by blue ring at one end
      Special fluorescent coating gives good colour rendering
      Extra-long lifetime and reduced early failures mean lower maintenance workload and costs, and facilitate change from spot to group replacement
      Reduced waste and disposal costs at end-of-life
      Compliant with HACCP regulations and supports HACCP certification


      Significant reduction of early failures based on new X-technology
      Extra-long life and high reliability
      Highly efficient 3-band fluorescent coating in combination with New Generation pre-coating technology
      Low mercury dose for a long-life lamp (5 mg)
      Fully recyclable lamp technology
      End-cap has an x-shaped green bottom plate to distinguish the lamp from other fluorescent lamps
      Strong, temperature-resistant protective Secura coating based on FEP (Teflon)
      Coating lifetime is identical to the lifetime of the lamp


      Food & beverages and pharmaceuticals industry: factories, distribution centres, retail outlets; locations where maintenance costs are high (high ceilings, difficult access)

      Warning & Safety

      To achieve published lifetimes for 100% operation, do not dim below 30%
      When used on electromagnetic gear, it is strongly recommended to apply only Philips S10 or S10E starters (for 18W types S2 or S2E) to achieve the published lifetimes, and to install new starters when relamping.
      A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
      It’s strongly recommended to replace Secura lamps before or at the moment the specified lamp life (50% failures @ 3 hrs switching cycle) is reached.
      Product Data Sheets
      • Add product
      • Add product
      • Add product
      Add product

      Cannot find what you're looking for?
      Perhaps one of these links might help