More brands from

    Close filters Show filters
    Show more filters
    Show less filters
    • Product
    • Wattage
    • Lamp Luminous flux
    • IES
    • Leaflet

    Sort by:

        Product family information

        Low-pressure mercury discharge lamps with a tubular 26 mm envelope

        Benefits

        Special protective coating in the lamp-, prevents products from contamination in case of accidental lamp breakage
        Easy identification in audit situations by blue ring at one end
        Special fluorescent coating gives good colour rendering
        Relatively high efficacy, both initially and during lamp lifetime, with high lumen maintenance
        Protects products from discolouring and loss of taste by 90% lower UV emission
        Compliant with HACCP regulations and supports HACCP certification

        Features

        Protective coating around the entire lamp
        Blue ring around one end
        Direct retrofit for all Standard and Super /80 TL-D lamps operating on conventional or HF gear
        Highly efficient 3-band fluorescent coating in combination with New Generation pre-coating technology
        Available in various colour designations
        Low mercury dose
        Recyclable at end-of-life, including the protective lamp coating
        End-cap has green bottom plate to identify lamp as recyclable

        Applications

        For use where contamination resulting from lamp breakage must be prevented, e.g. in food preparation, health care, pharmaceuticals, cleanrooms etc.
        Suitable for use in environments with increased risk of breakage, e.g. sports halls
        Suitable for use in environmens where UV emission should be reduced (museums, libraries, archives, food industry, fashion shops, etc.)

        Warning & Safety

        Not suitable for closed luminaires (as indicated by two blue rings)
        Recommended use in combination with self-stopping lamp control system
        A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
        It’s strongly recommended to replace Secura lamps before or at the moment the specified lamp life (50% failures @ 3 hrs switching cycle) is reached.
        Downloads
        Product Data Sheets
        Visuals
        • Add product
           
        • Add product
           
        • Add product
           
        Add product

        Cannot find what you're looking for?
        Perhaps one of these links might help