More brands from

      Product family information

      The MASTER TL-D Power Saver Set is a perfect solution for upgrading your existing lighting installation with a special TL-D lamp with an intelligent starter. It offers considerable energy savings while maintaining the same lighting level and a better light quality. The MASTER TL-D Power Saver Set is easy to install, simply by changing the lamp and the starter. The benefits are huge in all current installations with TL-D lamps.

      Benefits

      Significant energy saving while maintaining light levels and improving light quality in comparison with TL-D Standard colours lamps (halophosphate)
      Higher colour rendering than TL-D Standard colours lamps (halophosphate)
      Longer lifetime than TL-D Standard colours lamps (halophosphate)
      Instant, smooth and flicker-free start-up of the lamps
      Lamps are switched off directly at end-of-life, preventing irritation (no flickering), unnecessary electricity consumption and fire risk
      Starter contains flame-retardant components; UV-resistant canister ensures increased safety and secure ignition

      Features

      Up to 30% energy saving, while maintaining the lighting level compared to a TL-D Standard colours lamps (halophosphate), is achieved by an intelligent electronic starter in combination with the most efficient fluorescent TL-D lamp
      Designed for operation on electromagnetic gear only
      Full thermal safety monitoring which cuts off defective or end-of-life lamps
      Instant flicker-free ignition (nom. 2.0 seconds)
      Can be ignited from -15 to +50 °C
      Product range is RoHS-compliant
      Product range is covered by WEEE

      Applications

      Suitable to replace TL-D Standard colours lamps (halophosphate) in all existing TL-D luminaires with electromagnetic gear (220/240V, 50 Hz). Use on 60 Hz and/or 110 V systems leads to non-functionality of the system.
      Can also be used to replace MASTER TL-D Super 80 lamps, but the light output of the total installation will then be reduced by approximately 20%.

      Warning & Safety

      A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
      • Add product
         
      • Add product
         
      • Add product
         
      Add product

      Cannot find what you're looking for?
      Perhaps one of these links might help